TB Change.. 5th gear not holding CS in place
Pat Korach
tm2 at zipcon.net
Sun Jan 18 01:38:08 EST 2004
Dave
If you are in the Seattle are I can lend you the crank looking tool.
----- Original Message -----
From: "Dave K." <desmo888 at comcast.net>
To: "David Thoresen" <david at epicfoto.com>; <quattro at audifans.com>
Sent: Saturday, January 17, 2004 1:41 PM
Subject: Re: TB Change.. 5th gear not holding CS in place
> Do you use reverse (instead of 5th) for tightening?
>
> I don't really know, I have a 2084 (and lend it out for free...)
>
> Dave K.
>
>
> ----- Original Message -----
> From: "David Thoresen" <david at epicfoto.com>
> To: <quattro at audifans.com>
> Sent: Saturday, January 17, 2004 4:03 PM
> Subject: TB Change.. 5th gear not holding CS in place
>
>
> > Am I doing something wrong here? 5th Gear is not holding the
> > Crankshaft in place so I am worried no matter how much I jump up and
> > down on the bar to tighten the bolt it wont be enough since the shaft
> > it turning... am I doing something wrong here? Any BTDT's (Been there
> > done that's)
> >
> > TIA!
> >
> > David
> >
> > _______________________________________________
> > quattro mailing list
> > quattro at audifans.com
> > http://www.audifans.com/mailman/listinfo/quattro
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>
>
More information about the quattro
mailing list