Bubbles/froth in PS resivior [88 90Q]

[cobram at juno.com]

Matt Evans <matt at mattevans.org> writes:

> I put in some fresh pentosin and ran the motor for a while, turne 
> dthe wheel, even went out for a drive.  Still get a huge amount of
frothy 
> bubbling from the PS resivoir and it overflows and goes everywhere.  

Try lifting the front end off the ground, and then turning from stop to
stop 10-20 times or until the air (hopefully) stops sputtering out the
float indicator.  You could still have an air leak, but it's worth
bleeding the system well first to make sure your problem isn't just
trapped air.

BCNU,
http://www.geocities.com/cobramsri/