Clutch pedal problems - 4kq/QSW

[n-engelbert at terrans.net]

On my UrQ, the clevis itself (431 721 991 A) had the ovalled hole.  Ordered
a new one from the dealer at $12, clutch is fine again.  The clevis' hole
had worn itself out from about a 1/4" hole to a 3/4" slot.  There's a very
little amount of slop at the pedal now, but the clevis itself fixed the
problem.  IF it's in the pedal itself, take it to the local machine shop
and have them drill out the hole in the pedal and press in a couple of
small bushings.

HTH

Nathan Engelbert
83 UrQ DA900453
89 90q
91 200q20v donor