So how does one take off a door on a 4kcsq?

[SuffolkD at aol.com]

Wow 4K door. If you still have the stroage "bin" on the front/bottom of the 
door, where it looks like beer bottles would go, there are # 1-2 philips head 
screws going through that outer edge into the door panel and frame.  Remove 
those. 5 -6?

Something by the door latch?
Door arm pulls two larger philips heads # 3?
and the top of the door panel lifts off and up over the door lock button IF 
you unscrew the lock button FIRST.

Its been awhile so there may be one item I forgot.
HTH - Scott by BOSTON


> From: Hoffman Anthony 
> Inside the door, there are bolts that hold it on (if I remember it
> correctly). You'll have to take the door panel off, and possibly the window
> channel-although I don't remember that being necessary.
> Tony Hoffman
> 
> The outside door trim on my '86 4kcsq is pretty beat up so the easiest
> solution I can see, given that I will be re-painting my car within a month,
> is to take the door off from my '85 parts car and put it on this one.
> Problem is, unlike every other car that I have worked on, which had door
> hinges attached to the frame with bolts, this car has nothing even close to
> that. Looking at the door I cannot see how it could possibly be removed. The
> only thing that I can see is the pin in the hinge which may have been
> pressed in there. I tried tapping it with a punch-out tool and a hammer, but
> it didn't seem to move. How are the doors supposed to be removed?
> 
> Thanks,
> 
> Tyson Varosyan
>