oil filter adaptor question

[Alan Pritchard]

Hi guys, getting ready to install my oil cooler (1990 90q 10v), I have the
200/urq double oil filter adaptor and stud which I plan on fitting to my
block, but obviously I have an oil feed to the turbo (which I don't have yet
;)) and also the two hoses that go to/from the cooler (is this correct). So
my question is this, can the feed to the turbo be blanked off? Or is it
going to cause all sorts of problems? Has the turbo feed got a restrictor in
it? If so, could I just plumb it back into my sump???? (via the return
flange which needs to be drilled).

Best Regards,
Alan Pritchard

Network Administrator
Mechanical Design Engineer
Seaeye Marine Ltd.
+44 (0)1329 289000