Ignition Distributor Question

[JShadzi at aol.com]

Yes, from another CIS E car with mechanical ignition advance, pretty much anything with the vacuum advance canister on the side, you'll notice the CIS3 cars don't have this.

The whole CIS3 system isn't really necessary, for the work I'm not convinced it would be worth while, if a new distributor is all you think you need.

The only thing I've really seen go bad on those dist's is the hall sensor, what do you think is wrong with yours?

HTH,
Javad

>10x for the fast replay Javad! :)
>so 2 ways:
>1) finding distributor from another CIS car with 5 cyl Engine
>2) try to find whole ignition system from CIS3 car - maybe better.
>or....
>3) try to disassemble and clean my distributor.. I think 19 years of work
>may cause some dirt+oil deposits, that make mechanical advance harder.
>
>----- Original Message -----
>From: <JShadzi at aol.com>
>To: ""Christo Atanasov"" <chris at maimex.bg>
>Sent: Wednesday, March 03, 2004 12:15 AM
>Subject: Re: Ignition Distributor Question
>
>
>> Chris, no, the CIS3 distributors don't use mechanical advance like the
>CISE distributors, they are not interchangeable.
>>
>> Javad
>>
>> >Well, got a little question..
>> >I think that I have problems with my advance corection.. so I want to
>change ignition distributor. Wonder is it possible to use newer distributor
>from NG/NF (KE3-Jetronic) on my HY (K-Jetronic) engine without need of
>change whole ignition system.
>> >_______________________________________________
>> >quattro mailing list
>> >quattro at audifans.com
>> >http://www.audifans.com/mailman/listinfo/quattro
>> >
>>
>
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro
>