100Q vs V8 clutch holding torque
Peter Golledge
petergg at dimensional.com
Mon Mar 15 12:26:02 EST 2004
Denis,
The LT-1Q uses an uprated 5000TQ clutch from Kennedy Eng and a standard
5000TQ disk. Supposed to be good to 400 ft/lb of torque. I did have
a diaphram failure after two years (and a few track events ;-) and they
repaired it for free! You might like to check with Kennedy and see if
they have something suitable. They have a clutch press so you may be
able to send them a stock unit and have it uprated.
http://www.kennedyeng.com/
Cheers
On Mon, 2004-03-15 at 07:20, Denis Julien wrote:
> Hi all.
> The holding torque of the 100Q with a 240mm disk is the same as the V8 with the same 240mm disk ?
>
> If not what give the holding tork of the pressure plate, disk ... ? or how can i get more holding torque from my 100Q with a 240mm disk ?
> i know the disk composite do part of the job for friction but what else ? spring on the disk ? ......
--
Peter Golledge
87 LT1Q, 89 200TQA, 79 Porsche 930
More information about the quattro
mailing list