At the end of my rope with this stinkin cis

[Huw Powell]

> one thing i forgot, just for giggles i checked the resistance across the
> wires was 4.4k ( i think) seems high, lends to the broken wire theory... or
> bad component on the ecu. Best plan of action then would be to check each
> wire, check the test harness, then pull the ecu and look for bad components?
> (using a different meter)

4.4k ohms is not an open circuit, it could simply be the output 
resistance of the circuit that drives the actuator.

Why not hook all components back up and measure the voltage output of 
the OXS (with it still connected)?  Your meter seems to work on other 
ranges... it should go up and down in the 0.2-0.8 or so volt range.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/