'89 200T block question

[Alan Pritchard]

Ah, that was the other thing about the ng head was it not? Sodium filled
valves I believe....

Best Regards,
Alan Pritchard

Network Administrator
Mechanical Design Engineer
Seaeye Marine Ltd.
+44 (0)1329 289000

 -----Original Message-----
From: 	Jim Green [mailto:jeg1976 at yahoo.com] 
Sent:	26 May 2004 15:38
To:	quattro list
Subject:	Re: '89 200T block question


--- Denis <sparkplugvw at hotmail.com> wrote:
> I tought use my MC-1 block with  with the 2.3
> head..... Ben is doing similar
> project...
> 
> My 90  is 2.3 not 2.22. The 2..2 in on my 5000TQ
> 1987.... 2.15 on 5000T
> 1985.
> 
> You  want to use 200TQ pistons on the 2.3 NA block
> right ? to lower the
> CR...

You can't just swap the turbo pistons into a 2.3 block
because the bore is different.  You can use the head
on a turbo block, but you will not have sodium filed
exhaust valves, which is a no no in my book on a turbo
motor.  

=====
Jim Green
'89 90tq
'89 80q
http://www.mswanson.com/~jgreen/car_home.html


	
		
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/ 
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro