Need info on Cylinder head removal - Progress Report

[Livolsi, Stephane]

> 
Talking about head bolt tool....


> Sorry for the late reply...just catching up.
> The bolt is 11mm in diameter, but the tool you need is a 12mm 
> triple-square bit. They usually come as a set of 6, 8, 10, 
> and 12 mm bits anyway. The 10mm bit is for the inner CV 
> joint, but I haven't found any use for the 6 or 8mm on my 
> Audi. The 4-pc set is pretty cheap: $15 at Autozone. Better 
> yet, go for a nice socket bit like this: 
> http://www.thetoolwarehouse.net/shop> /SK-41422.html

I have a 10mm and 12mm triple square. The 10 is too small and the 12 is
too big - I just tried about 10 minutes ago at home.  I suspect it is
11mm triple square, which I cannot locate, locally....
>