Subframe, Swaybar and Control Arm Replacement Nuts and Bolts

[Brett Goetz]

I've been reading about getting replacement nuts and bolts for the front 
end of my car online from Bolts Depot or the local John Deere or Cat 
dealer.  I would like to do it, but my '88 5KCST is my only form of 
transportation.  Does anyone out there know the length, thread and 
strength  for the following parts?
Subframe bolts
Front Swaybar bolts
Rear Swaybar nuts
Control Arm nuts and bolts
I have replaced all of the bushings and the control arms and should have 
replaced them at that time, but I didn't.  Now I'm dealing with a 
squeaky front end because of old hardware that won't torque right.  This 
way I can order them online without taking my car off the road.
Thanks

______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.