90 20v q subframe bushes

[Iain Atkinson]

It's time to do this delightful job, i am going to replace them with the ali ones from dialynx, i need a little advice before i start the job.

1. The bolts that hold the subframes on, are they screwed into the body of the car using a captive nut inside the body or is the thread directly on the car (hope this makes sense) i can envisage after 14 years of crud and road salt that the bolts may shear.

2. Dropping the subframes is a question of undoing the 4 bolts and other suspension bits attached???

3. Any special tools required???

TIA guys.


Iain

Disclaimer:


Volkswagen Group United Kingdom Limited (VWG)
Registered Office: Yeomans Drive, Blakelands, Milton Keynes, MK14 5AN
Registered in England No: 514809

This email and any files transmitted with it are confidential and may be privileged.
It is intended solely for the use of the individual or the entity to whom it is addressed. If you are not the
named addressee or have received this in error, please contact the sender and delete the material
immediately. Any unauthorised disclosure or copying is strictly prohibited.

Emails and any information transmitted thereunder may be intercepted, corrupted or delayed. As a result,
VWG does not accept any responsibility for any errors or omissions howsoever caused. Whilst all
reasonable endeavours are taken by VWG to screen all emails for known viruses, VWG cannot guarantee
that any transmission will be virus free