crimping technique??

[Kent McLean]

Mark Novak wrote:
> I've read you need a good crimping tool, but beyond that the only other
> thing I can conclude is that you need some shrink wrap and  a butt splice.

If by "good crimping tool" you mean a *ratcheting* crimper, then
you'll get a good crimp (one you cannot pull apart). I got mine
from MCM, Part No. 22-770:

<http://mcm.newark.com/NewarkWebCommerce/mcm/en_US/endecaSearch/partDetail.jsp?SKU=22-770&N=4>

Heat shrink wrapping will keep the connection cleaner longer, but
if the connection is inside the car, I wouldn't worry about it too
much.  If the connection is exposed to the elements (under the
hood), then you may want to consider sealing it with heat shrink
or electrical tape.

Kent