Heater Box assembly (was: Heater box removal - 93' S4)

Ivan Demkovitch idemkovitch at hotmail.com
Fri Apr 15 10:02:04 EDT 2005


Box is out.

Thanks to everybody who helped.
I DID NOT have to remove dashboard. There was 2 air ducts that hold by 1 
bolt each.
There was small panel on driver side that need to be unscrewed to get air 
duct out.

I crimped water hoses, disconnected them and pulled box out. That was easy 
part.
I noticed 2 connectors (red and blue) that wasn't visible from inside a car. 
I will have to reconnect them on assembly. They just popped out when I 
pulled box...
I noticed cracks on a housing around heater core epoxy glued by Audi 
"mechanic" who did repair last time. There was 3 or 4 hidden bolts that 
wasn't obvious. Had to buy long screwdriver.

Now back to assembly part. I found sources for blower motor and heater core 
(thanks to list members).

Where do I get this foam insulation strips? And what is the sticky stuff and 
where do I get that? And what do I use to clean up old sticky stuff?
:)

Thanks,
Ivan




More information about the quattro mailing list