Replacing windshield antenna with fender mounted Antenna

[Ti Kan]

SJ writes:
> Addendum to my original post.
> I dont want to install a power antenna. I will mount a generic whip style,
> pivot base antenna.
> 
> I have received several replies to my post, but none have addressed the
> issue of interfacing antenna cable to the radio.
> Does the radio have a standard antenna input jack in the rear antenna
> position? A standard antenna cable will plug right in?
> What do I do with the front antenna input jack? Just leave it unplugged?

I have not looked at the back of an old Delta radio in a long while
and don't remember what the antenna wiring looks like, but if it's
like most of the other more recent Audi radios, the antenna connection is
*not* "standard" (as in aftermarket radios).  They are part of the
multi-point connector blocks that plug into the radio, and if that is
what you have, you'd have to do some wire splicing.  As for the diversity
system, you could probably just leave the front antenna disconnected.

-Ti
-- 
Ti Kan
http://www.amb.org/ti
Vorsprung durch Technik