aaaargh no start problem

[Alan Pritchard]

Ok here goes, the 90q (2.3 ng) is going, a friend of mine is taking it
for a project :-(

But, I wanted to get her running before he had her away

Heres what ha been done

I swapped the head

Refitted t belt, checked that the flywheel mark and the back of the cam
pulley line up, also verified that the lobes were upwards.

Refitted the dizzy ensuring the rotor arm lined up with the notch on the
dizzy body

Refitted the dizzy cap ensuring the correct firing order

I have spark

I have fuel

But she is not even trying to start :-(

Everything ran fine before I took her apart, only other thing that has
changed is that I have refitted the original cam shaft as opposed to the
schrick 272

 With the ignition on you can rotate the dizzy and here the fp prime as
it passes through the hall sensor

I don't know where to go from here people :-(

 

Best Regards

Alan Pritchard 
Network Administrator 
R&M Electrical Group Limited 

Tel: +44 (0)23 8068 6610 
Mob: +44 (0)7870 164812

web: www.rm-electrical.com 

 


-------------------------------------------------------
R&M Electrical Group Limited
-------------------------------------------------------

Message from: Alan Pritchard
Message to: quattro at audifans.com
Date: 5/8/2005

This message (and any associated files) is intended only for the use 
of the individual or entity to which it is addressed and may contain
 information that is confidential, subject to copyright or constitutes a 
trade secret. If you are not the intended recipient you are hereby 
notified that any dissemination, copying or distribution of this message, 
or files associated with this message, is strictly prohibited. If you have 
received this message in error, please notify us immediately by replying 
to the message and deleting it from your computer. Messages sent to 
and from us may be monitored. 

Internet communications cannot be guaranteed to be secure or error
free as information could be intercepted, corrupted, lost, destroyed, 
arrive late or incomplete, or contain viruses. Therefore, we do not 
accept responsibility for any errors or omissions that are present in this
 message, or any attachment, that have arisen as a result of e-mail 
transmission. If verification is required, please request a hard-copy 
version. Any views or opinions presented are solely those of the author 
and do not necessarily represent those of the company.