Powder Coating WAS:Need some HowTo for Oil pan replacement

[Evan Parker]

Use very very thin string :) I did this once and use a little itty bitty
guitar string.  That's my trick, but I bet theres a way better one.


Sincerely,
 
Evan P. Parker

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
On Behalf Of Kent McLean
Sent: Monday, December 05, 2005 4:25 PM
To: mswanson at sonitrol.net
Cc: quattro at audifans.com
Subject: Re: Powder Coating WAS:Need some HowTo for Oil pan replacement

Marc Swanson wrote:
 > Yeah, DIY powdercoat works really well, even with the cheap guns!

Is there a trick to hanging the pieces so that you don't get a bump
where you hung the part from (or where it laid on a grill)?  You have
the same problem with paint, but paint requires multiple coats, so you
can minimize it.

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro