Competition Ltd Harness Wiring

[Keith Lawyer]

>>> Huw Powell <audi at humanspeakers.com> 02/14/05 01:08PM >>>
>Since it sounds like you have no instructions or schematic for the CU

>harness, why not just experiment with a fused 12v wire and a ground
>>wire until you figure out which harness terminal is which?

Yeah, *fused* 12V wire would the key LOL.  I guess I was too lazy to
make one up last nite.  So far I've received an email response from CU,
but he listed the blue wire twice, I'm sure he meant to type orange in
place of one of those blues.  Hopefully I'll get a response but I'm
still open to replies from other listers who might be willing to walk to
their CU equipped cars and tell me which mate up with the blue, orange
and white wires.

Again, this is for the relay *switching means,* not the plugs at the
headlights themselves.

Doh, just got another response from Tom at CU:  Blue=ground, white=high
beam, orange=low beam.  

I'll take a look tonight and HOPE that's not how I already had it when
I was getting no apparent change when switching to brights.

Keith L
who apparently struggles with the simplest of tasks........