Megasquirt Info

[Dan Cordon]

jesper wrote:

<snip>
> 2. do the injector pigtails come with the injectors or is that a
> new/salvage item?
<snip>

While the GM pigtails are cool (in that they have the cylinder number 
stamped in to the plastic) I don't like re-using pig tails is possible. 
Also, with the I5 arrangement, you probably won't get confused which 
clip goes on which cylinder anyway.  For the custom EFI setups I do in 
my lab, I like to use the clips available from MSD. Here's a link to them:

http://www.msdignition.com/fuel_10.htm#pn2400

You can get these through many places, but www.summitracing.com usually 
has a pack of 8 (with pins) in stock for ~$18 + shipping.

MSD also makes some decent injectors too. See them at:

http://www.msdignition.com/fuel_5.htm

Part # 2013 would be a 12 ohm at 50 lb/hr, but they're around $90 each. 
Chances are you'll be able to find a cheaper alternative many places.

-- 
Dan Cordon
Mechanical Engineer - Engine Research Facility
University of Idaho