Rust Through and Steering Wheel question

[LL - NY]

Been there and done that on my 200Q, and as Bob said, on the S-car it
looks even easier (without pulling the wheel). Just be careful in
either case to protect the wood/carbon fiber trim, the bottom of the
IC is capable of scratching the top of the piece. I use index cards,
masking tape failed to protect my 200's wood.

LL - NY


On Mon, 31 Jan 2005 16:07:54 -0500, Robert Myers <rmyers1 at charter.net> wrote:
> 
> I have had the instrument cluster out of my present urS6 and a couple of
> earlier 200's.  It was(is) not necessary to remove the wheel at all in
> order to pull the IC.  The job is very easy in the S6 with its adjustable
> wheel and was a bit of a Chinese puzzle with the 200 but not difficult even
> then.
> 
> Bob
> 
> At 09:10 AM 1/31/2005, Alex Kowalski wrote:
> >Now the question:  I'll be taking off the steering wheel to remove the
> >instrument cluster, as per the Bentley.  Is it OK to reinstall the wheel
> >with the original hardware or should I get a new nut/washer?
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>