Part / Connector NEEDED 4000Q 1986

[Mark R]

Scott, a standard Bosch fuel injection 2-pin connector.  LOTS of these
on any '80's to '90s Bosch injected systems.  I have a few laying
around with pigtails... want me to solder and shrink tube longer leads
and drop it in the mail tomorrow?  You know how to get a hold of me.

Mark (who's non-Audi made VIR and WGI no problem, but now has a rough
idle and difficult starting... sounds like a collapsed lifter!  D'oh!)

On 7/18/05, SuffolkD at aol.com <SuffolkD at aol.com> wrote:
> I need a connector (two wire) that goes from the harness to the DPR (two
> screw thingy) on the fuel distributor. The Differential Pressure Regulator.
> 
> I need the plastic connector and about a foot or so of lead lenght.  Do you
> have one and how much?
> 
> Part number is:
> 025 906 231
> 
> Picture here:
> http://www.quattro123.com/4000/VacuumLEaks/MVC-388F.JPG
> 
> Full story here:
> http://www.quattro123.com/4000VacuumLeaksandWires.htm
> 
> TIA - Scott by BOSTON
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>