Sunroof Removal on 5000/100/200/V8

[Tony Hoffman]

Chris,
 
I just pulled mine (five minutes). I've been meaning to do it, and your questions gave me the motivation I needed. Anyhow, the screws go as follows:
 
4 screws from the inside holding the motor in place - pull after putting the sunroof to the rear.
one screw on each side holding the wind deflector bars in place. 
two screws on each side holding the wind deflector in place
two screws in the center of the sunroof (the ones with the smaller head)
one screw on each side at the very rear of each of the guide rails.
 
Slide the sunroof forward all of the way very carefully so as not to scratch it. pull it up slightly and slide it forward a bit more. When the rear seal has nearly cleared, pull it up out of the hole and slide it the rest of the way out.
 
The disssasembly will be in the second email.
 
Tony Hoffman

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com