Rear Tierod nuts

[Jim Dupree]

Easiest with 3/8" impact gun. Push tie rod end toward
the nut, puts more pressure on the tapered portion of
the shank. If you hold enough pressure on the taper
the shank can't turn with the nut.
A little oil on the threads can help some too.
Good luck
Jim

--- Kneale Brownson <kneale at coslink.net> wrote:

> What's the secret to removing the nuts from the
> wheel end of the rear
> tierod on a 4kq?  I got the nuts to unthread maybe a
> quarter inch and then
> the bolt part of the assembly started to turn.  The
> other end of the bolt
> ain't available to grab with something like vise
> grips.  Do I have to
> Dremel 'em off?
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>