Making a blink code decoder

[Fred Munro]

Iain;

When I made a blink code reader for my '91 200q I stuck a LED in the cap of
a defunct ballpoint pen and ran the wires out the open end. I used the LED
to limit the current drawn through the ECU. From what I recall I triggered
it by shorting the appropriate contacts in the connector block under the
dash.

Fred Munro
'94 S4


-----Original Message-----
From: quattro-bounces+munrof=sympatico.ca at audifans.com
[mailto:quattro-bounces+munrof=sympatico.ca at audifans.com]On Behalf Of
iain.atkinson at tesco.net
Sent: March 17, 2005 2:23 PM
To: quattro at audifans.com
Subject: Making a blink code decoder


I am trying to make myself a blink code decoder, would a 12v car bulb work
plugged into the diagnostic sockets???? if so what's the procedure to get it
to blink.


Thanks


Iain

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro