Bearing question

[Kent McLean]

Rob Mocas wrote:
 > Hopefully I can rent the tool to press out the bearing without
 > removing the strut.  Otherwise, I have a shop press.   Just
 > don't really want to remove the whole strut.

Huw built a bushing press out of plumbing pipe and threaded
rod. You may be able to make a similar tool for the bearing.

<http://www.humanspeakers.com/audi/bushings-pix2.htm>

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke