After Valve Job ??????

[Tony Hoffman]

Keith,
 
The speedo gets it's signal from a sender from the drivers side of the transmission. There is a plug right below the brake master cylinder on the drivers side, two wires, big round plug. There is also the possibility of the instrument cluster having loose connections. There is a writeup in the archives about this. 
 
Tony Hoffman

Keith Sturtz <syfer at mindspring.com> wrote:
Ok so on my 1990 Audi TQ 200 I got the valve job done now i have a 
couple of issues .
1 The check engine light flickers or comes on for a second when excel 
orating .
2 The speedometer does not for the most part work at first it was 
jumping every second or so, now every 5 minits or so it will jump back 
up this did not happen before the valve job ( R&R HEAD) so it has to be 
something loose so my ? is ... Were Does Spedo get signal ( sensor ? 
) from .


_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro

		
---------------------------------
Yahoo! Mail
 Stay connected, organized, and protected. Take the tour