After Valve Job ??????

[Keith Sturtz]

Tony
Thanks for the Quick reply  I dought it is the board as like i have 
written no problem before the Valve Job Ill just have to find the 
connector and sensor and  test them somehow ???

Keith


Tony Hoffman wrote:

> Keith,
>  
> The speedo gets it's signal from a sender from the drivers side of the 
> transmission. There is a plug right below the brake master cylinder on 
> the drivers side, two wires, big round plug. There is also the 
> possibility of the instrument cluster having loose connections. There 
> is a writeup in the archives about this.
>  
> Tony Hoffman
>
> Keith Sturtz <syfer at mindspring.com> wrote:
>
>     Ok so on my 1990 Audi TQ 200 I got the valve job done now i have a
>     couple of issues .
>     1 The check engine light flickers or comes on for a second when excel
>     orating .
>     2 The speedometer does not for the most part work at first it was
>     jumping every second or so, now every 5 minits or so it will jump
>     back
>     up this did not happen before the valve job ( R&R HEAD) so it has
>     to be
>     something loose so my ? is ... Were Does Spedo get signal ( sensor ?
>     ) from .
>
>
>     _______________________________________________
>     quattro mailing list
>     quattro at audifans.com
>     http://www.audifans.com/mailman/listinfo/quattro
>
> ------------------------------------------------------------------------
> Yahoo! Mail
> Stay connected, organized, and protected. Take the tour 
> <http://tour.mail.yahoo.com/mailtour.html>