After Valve Job ??????

[Keith Sturtz]

How about my first ? IE Check engine light comes on for a sec when 
excellorating ???


Keith Sturtz wrote:

> Tony
> Thanks for the Quick reply  I dought it is the board as like i have 
> written no problem before the Valve Job Ill just have to find the 
> connector and sensor and  test them somehow ???
>
> Keith
>
>
> Tony Hoffman wrote:
>
>> Keith,
>>  
>> The speedo gets it's signal from a sender from the drivers side of 
>> the transmission. There is a plug right below the brake master 
>> cylinder on the drivers side, two wires, big round plug. There is 
>> also the possibility of the instrument cluster having loose 
>> connections. There is a writeup in the archives about this.
>>  
>> Tony Hoffman
>>
>> Keith Sturtz <syfer at mindspring.com> wrote:
>>
>>     Ok so on my 1990 Audi TQ 200 I got the valve job done now i have a
>>     couple of issues .
>>     1 The check engine light flickers or comes on for a second when 
>> excel
>>     orating .
>>     2 The speedometer does not for the most part work at first it was
>>     jumping every second or so, now every 5 minits or so it will jump
>>     back
>>     up this did not happen before the valve job ( R&R HEAD) so it has
>>     to be
>>     something loose so my ? is ... Were Does Spedo get signal ( sensor ?
>>     ) from .
>>
>>
>>     _______________________________________________
>>     quattro mailing list
>>     quattro at audifans.com
>>     http://www.audifans.com/mailman/listinfo/quattro
>>
>> ------------------------------------------------------------------------
>> Yahoo! Mail
>> Stay connected, organized, and protected. Take the tour 
>> <http://tour.mail.yahoo.com/mailtour.html> 
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>