[urq] Door strips on 4K CSC

[Ben Swann]

Yeah, but wouldn't do this on an UrQ!  I thought you were talking about the
door mouldings on a 4kq.  There are none on an UrQ, at least not mine.

Ben
----- Original Message -----
From: "Brendan" <mailinglist at endosquid.com>
To: "Ben Swann" <benswann at comcast.net>
Sent: Wednesday, May 25, 2005 2:05 PM
Subject: Re: [urq] Door strips on 4K CSC


> On Wednesday 25 May 2005 01:58 pm, Ben Swann wrote:
> > Are you talking about the door moulding that prevents parking lot door
ding
> > damage?
> >
> > Often when they have been removed, they are warped.  Then no double
sided
> > tape will do the job and they'll keep peeling off.  I have used a
> > combination of double sided tape, and black RTV to provide permanent
> > adhesion, but the trick to getting them in place is to use 2 or 3 well
> > placed stainless no. 8 x 1/2"  screws to hold the moulding flat against
the
> > door.  Usually a screw at each end will do, since normally they are
bowed
> > out.
>
> Just right through the moulding into the steel?