4ktq-No Start Codes

[mholme3@aol.com]

I'm having issues getting this car up and running. I've swapped out the 
mac 11 and am finally able to get codes:

 2111=rmp sensor.

  This is the only code I get. I'm not sure if this code should be 
ignored because the car is not running, but this is what I get when I 
crank the car for 5 sec and insert spare fuse. I'm using the long UrQ 
rpm sensor that sits in the bell housing and it's brand new.

 Second issue comes when I do the diagnostic test:

  The first item that should come on is the fuel pump. The code for the 
pump relay flashes, but the pump does not run. All other solenoids work 
in order and flash the codes. I can close the fuel pump relay manually 
and get the pump to run. I've also verified continuity from wiring 
harness to fuse box on all the pins. So I'm guessing I need a new 
relay.

 Any thoughts or suggestions are appreciated.

 Marques
 87 4kq