Check Engine light - Slight water leak

[Kent McLean]

Kent McLean wrote:
> You can check the diagnostic troubleshooting codes related to
> the CEL using an inexpensive (<$5) LED with built-in resistor
> from Radio Shack. (I found a part number 276-209, but that may
> be outdated). Directions for using it to pull the codes may be
> found on <www.v12.org>.

Having written that, I need to apologize; I have CRS [1].

The Type 44 (100/200) needs an LED test light; the V6s can use
the CEL just by jumping the right terminals in the fuse box and
watching the CEL flash.  The terminals can be jumped with just
a paper clip.  The problem is that not all Audis came with a
light behind the CEL display; but since yours came on, that
should not be a problem.

Sorry for confusing anyone.

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke

[1] Can't Remember Shite.