Replacing CGT Windshield DIY

[Huw Powell]

> The AZ storms killed one of my CGTs, and damaged another. I want to take
> the intact windshield from one and install it in the other. The weather
> stripping/rubber seal is good on both of them. I know I can get the good
> windshield out with seal, but am a little foggy on how to get it back
> in. I've even considered modifying the rubber seal so I can just glue
> the whole darned thing in place.
> 
> Any tips would be GREATLY appreciated! All the local glass shops want
> $500+ to do this.

I once had a glass guy come out and do just this - for $100.  Most auto 
glass operations run "mobile," since people bring their car to their 
local shop and the shop jobs it out.

In this case, he had to remove one windshield carefully (at my risk), 
one without worrying, and install the better one.

For $500 I'd expect a new windshield and complete detailing...

PS, don't try gluing it, do it with the seal the way it is designed. 
Everyone always mumbles about using "a piece of string" to work the 
rubber around the glass as it goes in.

PPS, the appropriate lube is just soapy water (or plain liquid soap). 
Soap, um, washes off afterwards.

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/