Mounting of aftermarket oiltempgauge (and running wo alternator)
Huw Powell
audi at humanspeakers.com
Fri Aug 18 19:39:12 EDT 2006
> I'm trying to mount an aftermarket oil temp gauge in my 100 Q -87. My
> problem is that there isn't a clue in the gauges manual of were to
> mount the sender. I've looked in the VAG ETOS and in my Haynes book
> (I now I now... but their book for my 80CC -85 were good) and my best
> guess is to replace the screw in the oilpump that holds the pressure
> relief piston. There is some sender that can be mounted there
> according to the ETOS but it doesn't say for what.
That is where the factory sender goes. In the bottom of the oil pump.
(in the I-5, anyway)
You will probably want to get a spare screw plug for the hole, and drill
and tap it to fit your sender. (I say a spare, so if it takes a few
tries, you still have a good one to seal things up)
--
Huw Powell
http://www.humanspeakers.com/audi
http://www.humanthoughts.org/
More information about the quattro
mailing list