Type 44 Eurolight Beam adjuster motor

[Dave C]

Jesper,
I don't have all the answers but do have a factory wiring harness and switch
in front of me.  The wiring for the motors is separate from the headlights
themselves and it would appear there is no provision for a relay in the
factory wiring.  You obviously need a way to connect the wiring at the
motors and at the switch ... the factory plugs with rubber booties at the
motor ends would be ideal.  You also need a way to mechanically connect the
motors themselves to the headliught adjusters.  I'm not sure how this is
accomplished ... whether you can attach the motor directly to the manual
adjuster of if you need another piece which I may be missing.    I would
need to spend some time figuring this out and would also appreciate hearing
from anyone who has successfully installed these adjusters on a US spec car.
- -
Dave C.


Jesper wrote...
I'm about to install my euro's (with the blau harness) and have run into a
slight hurdle. I would love to have the Aiming adjustment motors
operational, however the blau harness does not accomodate them. I do have
the OEM switch, but no wiring nor a relay. Has anyone ever sucessfully
hooked up these and if so may I have some info on the subject. I'm looking
for a relay, or realy part number, and a wiring schematic for it. thank you
all in advance for any information and or help.****

--
Jesper Moreau
'88 5KTQ rocket - 239HP CIS Daily driver
'87 5KTQA Projekt eminent - future 420HP EFI  Daily driver