project 4ktq It's ALIVE!!!

[Ed Kellock]

My first thought is that the idle screw may very well not be able to do
anything at this point because of the fairly significant vacuum leaks you
seem to suspect that you have.

ed


On 2/16/06, Matthew Kramer <stpndsmn at yahoo.com> wrote:
>
> I am using a an old skool 5kt side tb (non-intercooled turbo) manifold
> that has been modified to use a mitsubishi 4g63 TB facing to the firewall so
> any factory settings are long gone...   I have changed a fair bit of stuff I
> guess and now the CIS hates me!!
>
> Thanks
> Matt
>
> Brett Dikeman <quattro at frank.mercea.net> wrote:
>
> On Feb 15, 2006, at 11:57 PM, Matthew Kramer wrote:
>
> > I only sort of runs right now I am still tracking a couple of
> > vacuum leaks
>
> The best way to track down vacuum leaks is by pressurizing the entire
> intake.
>
> > , one is in a weld and for some reason the Idle screw isn't working
> > right either..
>
> What idle screw? If you're talking about the screw on top of the
> throttle, that is not to be adjusted- it's set at the factory.
>
> Brett
>
>
>
> ---------------------------------
> Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on
> new and used cars.
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>