'87 4kq: alternator belt change

Kneale Brownson kneale at coslink.net
Sun Jan 22 19:56:02 EST 2006


This is how I've had to install both the A/C and alternator belts on my
200q20v.  On our '86 4KQ,  the adjuster is a bolt that pushes on the block,
not the rack and wheel system.  

At 03:03 PM 1/22/2006 -0800, Mark J. Besso wrote:
>Try seating the belt in the larger of the two pulleys and start it on the 
>smaller one.  With a large breaker-bar, or ratchet, you can turn the engine 
>over and that should rotate the belt into place.
>
>~Mark
>
>
>----- Original Message ----- 
>From: "Andrew Buc"
>Subject: Re: '87 4kq: alternator belt change
>
>> On Sunday, January 22, 2006, at 02:28  PM, Robert Myers wrote:
>>
>>> Or possibly you have a belt one size too small?
>>
>> I tried reinstalling the spare belt, which had previously been on the car 
>> for thousands of miles, and it was no go.
>>
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro



More information about the quattro mailing list