A/C compressor clutch removal tool

[Dave C]

Patient is an 89 100 with Nippondenso compressor ...  According to Scott
Mockry's helpful hints at

http://www.sjmautotechnik.com/trouble_shooting/ac.html#clutch


... it seems my clutch pulley bearing is bad and can be replaced without
removing the compressor.  Scott says " ... the front face of  the compressor
clutch can be pulled off after removing the nut and lock washer."   I've
removed the nut and lock washer but it appears a special tool is needed to
remove the front face.  Bentley says this tool would be the expensive ($100
+) VW1623, similar to a bicycle crank puller which some people say actually
works.  But crank pullers are availabe with various threads and the one I
have is too small.

Can anyone tell me a specific tool that would work for A/C clutch removal?
Something other than the VW tool mentioned in Bentley?


Thanks,
Dave C.