2002 S6 Avant rear rotors

mike mikemk40 at yahoo.com
Sun Apr 1 13:31:48 EDT 2007


harder is they way to go....i fine a copper hammer
gets more energy in and will shift anything 


--- Grant Lenahan <glenahan at vfemail.net> wrote:

> Oh wise ones,
> 
> So, yesterday I tackled the relatively easy task of
> rear rotors and 
> pads on my '02 S6 avant.
> 
> One problem - The rear rotors would not come free. 
> In fact, they were 
> so tight, and the fit between them and the hub so
> clean, that we began 
> to wonder whether the rotors I received (which look
> right, and have a 
> large, 2 5/8"+, hole in the center to clear the hub
> face) were wrong 
> and if the hub nut must come off to release the rear
> rotors.
> 
> - Bentley simply says remove rotors
> - rotors I received appear to be retained by nothing
> more than lug bolts
> 
> - BUT, neither pulling nor hammering/heavy tapping
> (on the back of the 
> rotor) released them...........
> 
> Rather than damage something, and since the rotors
> were really in 
> pretty good shape, I left them be and just did the
> pads.
> 
> Any experience here?  Just hit it harder, or are my
> rotors wrong, or is 
> there a trick.
> 
> Grant
> 
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
> 



		
___________________________________________________________ 
The all-new Yahoo! Mail goes wherever you go - free your email address from your Internet provider. http://uk.docs.yahoo.com/nowyoucan.html


More information about the quattro mailing list