2002 S6 Avant rear rotors

[Grant Lenahan]

Nah, (well, I hope not) I used a composite board to back the hammer, 
and I didn't beat too hard - I'd worry about CVs, wheel bearings, etc.

That's why i didn't get it off, really.

Thanks for the warning, though.

"later,

Grant
On Apr 1, 2007, at 2:36 PM, Huw Powell wrote:

>
>
>> Thanks all, you've collectively confirmed it.
>> Since the rotors are pretty good, I'll leave them for now. But next 
>> time - heat and a rubber persuader.
>
> Yes to the heat, of course.
>
> Did you dent up the rotor much trying to hammer it off?  If so, it 
> might chew through the pad rather quickly...
>
>>>> - BUT, neither pulling nor hammering/heavy tapping (on the back of 
>>>> the
>>>> rotor) released them...........
>
> -- 
> Huw Powell
>
> http://www.humanspeakers.com/audi
>
> http://www.humanthoughts.org/