Plug on the rear of 10V head leaks. Is r&r possible in place?

[Louis-Alain Richard]

On my urQuattro (10V WX engine), after an expensive head rebuilt, the 
oil plug at the back of the head was leaking at the first start of the 
engine.

I managed to seal it without removing the head by using JB-Weld epoxy, 
after cleaning the threads very carefully. Cleaning is the most 
important part here.

Louis-Alain


Le 07-02-19, à 10:45, kbogach a écrit :

> Hi all,
>
> the plug is just above the heater hose.  Is it possible to remove the
> plug and put a new one with the head in place?
>
> Thanks.
> Konstantine
> 200tqa '89 (trouble)
> UrS4 '93
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>