brake pad wear indicator connector

[George]

Kent:        After seeing your email, I pulled the secondary connector apart
and jumpered the pins. It did not solve my idiot light problem, so my
problem is obviously between the connector and the readout. At the connector
I had continuity in both directions, so the jumper at the wheels was good
and from the dash side the circuit was closed.  Not sure what all this
means.

Let us know if you solve this riddle........
 
George Sidman
Chairman & Chief Technology Architect
WebLOQ, Inc.
2801 Monterey Highway
Monterey, CA  93940 - Suite H
Monterey               831 372-2600 x 227            
Santa Clara          408 282-3548                      
Mobile                    831 601-1776 
-----Original Message-----