1990tqa 200

[Huw Powell]

> Yup.  BTDT.  It's actually quite easy.  Under the rear seat,  in about the
> middle and toward the front edge of the seat, there's a controller box which
> has a wiring connector and some vacuum lines.  In the wiring connector
> there's a blue/white wire.  That's the speed signal wire.  Get rid of it and
> no auto unlock on the rear diff.  I did it the hard way and removed the
> connector from the block altogether so it could be replaced later.  It could
> also be cut and respliced later if that "feature" was wanted again.

Or a switch could be placed in the wire.
-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/