Type-44 cruise control connecting rod
Ameer Antar
antar at comcast.net
Tue May 8 23:16:59 EDT 2007
Not a bad idea. It almost looks original. I've ordered the buffer for the v8q.
I'll see how long that lasts. At least I have a few ideas for when it does rot
out... Thanks.
-Ameer
-------------------- Original Message --------------------
From: Eric Kissell [kisselll at gmail.com]
To: Ameer Antar [antar at comcast.net], quattro at audifans.com
Date: 5/8/07 8:07:24 PM
Subject: Re: Type-44 cruise control connecting rod
Ameer - Picture attached.
Not pretty but effective.
I whipped this up in the rain in WV in a Lowes parking lot when the little
plastic piece failed during a trip. That was over 6 years ago.
It is a piece of steel strap used to hang pipes, etc. It already had holes that
contractors drive nails through. I just cut it to length, slipped it onto the
rod and then bent the ends over the mating part on the pneumatic actuator with
a pair of pliers.
HTH,
Eric
On 5/6/07,Ameer Antar < mailto:antar at comcast.net >
wrote: I'm trying to fix my cruise control system, but the rubber bushing on
the
connecting rod is rotted out. I've even put in a used one in decent shape, but
the same thing happened to it. I guess it's just to hot under the hood above
the turbo. The dealer doesn't sell it apart from the entire rod, and that's
about $100. Has anyone out there found a good fix for the rotting rubber
bushing? TIA.
-Ameer
_______________________________________________
quattro mailing list
mailto:quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)
More information about the quattro
mailing list