Door panel - A6QA

[Bill Shaw]

Yep,  that got it off.  Both the green plastic sliders were broken where 
they hold the ferrule so the cable was just slipping through.  A little 
JB Weld and it *should* be good as new.  Slick design is right.  4 bolts 
and I could take the whole mess over to the bench and work on it.  
Thanks Kyle,

Bill

Kyle Ledford wrote:
> If its like my 01 you should once you remove those just be able to lift
> up on the panel...  It is pretty slick... eve fixing the power windows
> on the 01 is not bad because the whole frame comes out around the
> window...  glass and all...    one big piece... There is a good write up
> on it at AudiWorld...  
>
> Kyle
> 01 A6Q
> 90 CQ
>
> -----Original Message-----
> From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com]
> On Behalf Of Bill Shaw
> Sent: Thursday, May 24, 2007 12:49 
> To: quattro at audifans.com
> Subject: Door panel - A6QA
>
> How do I get the door panel off the front passenger's side door on a '99
>
> A6QA?  I have a window that won't go up or down and I need to get in 
> there to fix it.  I found 2 phillips head screws,  one in the forward 
> jamb and one in the rearward jamb but don't see anything else holding it
>
> on. 
>
> Please copy me directly in any responses,  I'm in digest mode.
>
> Thanks,
>
> Bill
> '99 A6QA
> '84 928s 5.0L Vortech/749
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>
>