80q Ignition Lock Cylinder R & R
Al Streicher
streichea001 at hawaii.rr.com
Sun Nov 25 20:07:40 PST 2007
The bit you need is, according to my Bentley, a Snap-On #FPXR30 or
equivalent. Good luck Tom, my '90 80 non-Q ignition switch assy broke today.
Fortunately I was able to get the switch off of the lock cylinder housing,
inserting a screwdriver and starting it that way. Hopefully I can get the
housing out without removing the airbag, column switches, steering wheel,
etc. The end of the shaft at the other end of the key, broke where it went
into the switch, also breaking the switch housing.
Watch your email Tom.
Al
Mililani, HI.
-----Original Message-----
From: quattro-bounces at audifans.com
[mailto:quattro-bounces at audifans.com]On Behalf Of toomanyaudis at aol.com
Sent: Sunday, November 25, 2007 2:24 PM
To: quattro at audifans.com
Subject: 80q Ignition Lock Cylinder R & R
Gentlemen,
I am in need of replacing the ignition lock cylinder on my 88 80q (turns
about 1/4 of the required amount before jamming up on me).
I need to remove the housing to replace the cylinder, and I was wondering
what all I needed to take apart to get to this blasted thing part.
Do i need to move (remove?)?the steering column, or does the housing detach
from the column in some rational manner?
I removed the steering wheel and the column switches to take a peak at the
internal workings, and was confronted with what appeared to be a bolt with a
security torx head (it's got a thingy in the middle like the kind they use
to assemble bathroom stalls to keep drunk fraternity boys from taking the
stalls apart) and i am at a standstill.
I used a well-chewed piece of gum to get an impression of the bolt head so
that I could then get the correct bit.? Lowes didn't have it, although the
Tool World attendant was quite impressed with my chewing gum ingenuity.
Does anyone know if I can purchase such a bit independently, or does it only
come with commercial bathroom stall assemblies?
More importantly, will removing this bolt allow me to remove the lock
cylinder housing without further invasive automotive disassembly?
Your assistance is appreciated.
Thanks,
Tom Werner
Charleston SC
________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! -
http://mail.aol.com
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)
More information about the quattro
mailing list