high beams won't turn off!

[Huw Powell]

> I have had relays fail and do this but it's not likely they both would fail. 
> Or maybe blau put both on one.  I used one relay for each beam, high, low, 
> left, right.
> I'm going to guess something in the head light switch.
> Find the signal wire to the high beam relay and open it up(disconnect).  If 
> lights go out trouble is upstream,  if lights stay on suspect the relay.

I believe the circuit goes: power >> switch >> fuses >> relay(s) or lights.

So check what's going on at the fuses, after you fiddle with the relay(s).

-- 
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/