V8 Quattro Distributor cap removal

[Geraint Lloyd]

I had a similar problem on the 964. 
If you have screws as opposed to bolts then maybe it's been replaced and the
steel screw has welded itself to the ally dizzy body. 
Try a short, sharp crack with a hammer on the end of the screwdriver 
Geraint

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Ben Swann
Sent: 01 October 2008 09:07
To: 'Tony Hoffman'; 'Ed Kellock'
Cc: quattro at audifans.com
Subject: RE: V8 Quattro Distributor cap removal

Thanks guys - I'll try that.

Ben 

-----Original Message-----
From: Tony Hoffman [mailto:auditony at gmail.com] 
Sent: Wednesday, October 01, 2008 8:29 AM
To: Ed Kellock
Cc: Ben Swann; quattro at audifans.com
Subject: Re: V8 Quattro Distributor cap removal

I'll second that. All the one's I've taken off were also 8mm. The Cizzy's
themselves are
10mm, and the rotors are glued on from the factory. If you are replacing
them, usually
they have to be broken off.

Tony

On Tue, Sep 30, 2008 at 11:02 PM, Ed Kellock <ekellock at gmail.com> wrote:
> All the dist caps I've removed have 8mm bolt heads.
>
> Ed

_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
---
Watch this space for ads :)