1990 CQ Door trim panel removal help needed

LloydMac LloydMac at suddenlink.net
Thu Oct 30 16:21:13 PDT 2008


Thanks Everybody I'll move it higher :)       Lloyd
----- Original Message ----- 
From: "Huw Powell" <one at humanspeakers.com>
To: "LloydMac" <LloydMac at suddenlink.net>
Cc: "QUATTRO LIST" <quattro at audifans.com>
Sent: Thursday, October 30, 2008 3:24 PM
Subject: Re: 1990 CQ Door trim panel removal help needed


> If it's anything like its sister model 90, there are a dozen or so plastic 
> clips with rubber pads that stick down about a 1/2" behind the metal in 
> various places.  So the door panel must first be moved vertically about 
> that far before you can pull it out of the way.
>
> Make sure all the screws are removed first, of course.  You'll probably 
> also want to undo the door latch handle to get some range of motion.
>
> LloydMac wrote:
>> 1990 CQ Door trim panel removal ( for R&R of cable) Bentley shows 
>> retaining clip locations and says push upwards to remove trim .Anyone 
>> have better explanation (don't want to break anything)   Thanks Lloyd 
>> _______________________________________________
>> quattro mailing list
>> quattro at audifans.com
>> http://www.audifans.com/mailman/listinfo/quattro
>> ---
>> Watch this space for ads :)
>>
>>
>
> -- 
> Huw Powell
>
> http://www.humanspeakers.com/
>
> http://www.humanthoughts.org/
> 




More information about the quattro mailing list