[s-cars] Competent Audi Tech, Southern Tier of New York

[LL - NY]

Thanks Steve. Hurley is a bit far from here for my friend's initial
interest. It may end up going that way. He used to commute up to Kingston
from here, right up 209, so he may even be familiar with it. And yeah,
Autofirme is way too far away for this. I may consider using them for my
UrS's clutch though.

On Tue, Jun 16, 2009 at 8:35 PM, Young, Steve <sryoung at trane.com> wrote:

>
> Larry...
>
> This may not be of much help, but on my way to Monticello to drive the
> Motorsports Club there, I remember seeing a place on Rt. 209 in the
> Hurley/High Falls area that advertised as an Audi shop.  It's on the
> right heading south, but I didn't catch the name.  It looks clean and
> neat, very professional, although I realize that may mean nothing.
> There's also Autofirme in Amenia, NY and I've head they are good, but I
> know they are east of Kingston.  I got nothing closer, sorry.
>
>
> Regards,
>
> Steven Young
> Project Developer - New York / Vermont Territory
> ____________________________________TRANE
> 301 Old Niskayuna Rd., Latham, NY  12110
> Tel: 518.724.1453
> Fax: 518.785.4359
>
> www.trane.com
>
> P Please consider the environment before printing this e-mail
>
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of LL - NY
> Sent: Tuesday, June 16, 2009 7:58 PM
> To: Mark Rosenkrantz
> Cc: Scarlist; Quattro List
> Subject: Re: [s-cars] Competent Audi Tech, Southern Tier of New York
>
> Not for me. I have to do a clutch on the UrS though, but since that too
> really needs a lift, I'm thinking of letting someone else do it. Come to
> think of it, I'd do the Timing Belt on her though. Anyway, know of a
> decent shop to do the clutch? My guy downstate is NLIB.
>
> On Tue, Jun 16, 2009 at 7:20 PM, Mark Rosenkrantz
> <speedracer.mark at gmail.com
> > wrote:
>
> > Larry,
> > I'd do it, but it's SO much easier with a lift... and my Rotary is not
>
> > up until I build a new garage (hopefully this fall).  I.E. even if I
> > don't charge as much per hour, I might be more expensive in the long
> run.
> >
> > It might be a lot of labor.... especially to drill out/extract the
> > frozen fasteners.  Generally they'll shear with air tools, allowing
> > the tank to drop, which frees up the access.
> >
> > Anyhow, you've been to my house, in Port Crane, NY.
> >
> > Anything less PITA he needs done?   ;-)
> >
> > Mark Rosenkrantz
> >
> > On Tue, Jun 16, 2009 at 4:19 PM, LL - NY <larrycleung at gmail.com>
> wrote:
> >
> >> Trying to help out a friend.
> >>
> >> I have a friend with a C4 100Q Avant that's in need of a new fuel
> tank.
> >> Friend has a replacement tank from Semple. Neither he, nor I have the
>
> >> time nor facilities to put in the replacement tank, so he's searching
>
> >> for a decent tech to do the job. First guy on the job had to struggle
>
> >> with the rusted bolts and backed out of the job when he couldn't get
> any to budge.
> >> No
> >> specification as to which bolts are rusted, but assuming that the
> >> axle has to come out first, I'd venture a guess it's to do with
> axle/diff.
> >>
> >> Anyone know of a decent, reasonable tech between Monticello, NY and
> >> Binghamton, NY along the Rt 17 corridor?
> >>
> >> TIA,
> >>
> >> LL - NY
> >> _______________________________________________
> >> quattro mailing list
> >> http://www.audifans.com/mailman/listinfo/quattro
> >> http://www.audifans.com/kb/List_information
> >>
> >
> >
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>
> The information contained in this message is privileged and intended only
> for the recipients named. If the reader is not a representative of the
> intended recipient, any review, dissemination or copying of this message or
> the information it contains is prohibited. If you have received this message
> in error, please immediately notify the sender, and delete the original
> message and attachment..
>