audi 200/audi 5000 dash

[DeWitt Harrison]

It may be possible to install the dash from a 200 into a 5000 but
I'm pretty sure you will not be able to stop there as one somewhat
different interior bit is connected to the next somewhat different
interior bit and so on until the complete interior, including door
trim panels must be swapped out. Then you get into issues with
the door handle mechanisms and parking brake differences. The
dashboard location of some electrical control modules differs
between the two models also. I wouldn't go there.

The seats will all swap out just fine, though, if you also swap
out the electrical connectors for the front seats (some rewiring
required).

DeWitt Harrison
5000CS

On Thu, 19 Mar 2009 22:06:52 -0300;
donald grady <audilvr at hotmail.com> wrote:

 the project is on hold but wiil go ahead later. i've gotten no responses.

> Date: Thu, 19 Mar 2009 15:41:46 -0500
> Subject: Re: audi 200/audi 5000 dash
> From: auditony at gmail.com
> To: audilvr at hotmail.com
> 
> > Donald, not sure if you got anywhere on this project, or any other
> > replies. If not, and you are still looking for info, let me know.
> > 
> > Tony
> > 
> > On Tue, Feb 17, 2009 at 5:00 PM, donald grady <audilvr at hotmail.com> wrote:
> > >
> > > is it hard or even possible to swap the dash from an audi 200 fwd turbo to a 5000 quattro wagon and is it possible to make the rear bench fit?
> > >